• NOTE – The MagLev Rail Depot set has pieces spread across multiple sheets in some cases. If you find you’re missing a piece, find it on another sheet.
  • Glue and assemble as indicated.
  • Make sure that doubled up edges are aligned before drying.
  • Note that piece 03a is slightly different from pieces 03b and 03c.
  • Glue and assemble as indicated.
  • Make sure that doubled up edges are aligned before drying.
  • Glue and assemble as indicated.
  • Glue and assemble as indicated.
  • This forms the CRANE TRACK piece.
  • Glue and assemble as indicated.
  • Make sure that doubled up edges are aligned before drying.
  • This creates the individual components of the CONTAINER CRANE piece.
  • Glue and assemble the individual components of the CONTAINER CRANE as indicated.
  • This creates the CONTAINER CRANE piece.
  • OPTIONAL – If you have Containers they will fit into the CONTAINER CRANE piece as indicated below (frame 19).
  • On piece 08 ensure all scores are crisply and evenly folded.
  • When assembling top bar pieces put glue dots in the end of the slots on the larger folded pieces before sliding on the smaller pieces.
  • Check top bars for square before allowing to dry.
  • These create the TOP pieces.
  • Glue and assemble pieces 20a & 21b and 20b & 21a as shown.
  • Make sure that doubled up edges are aligned before drying.
  • Glue and assemble remaining pieces as indicated.
  • These create the CRANE ELBOW pieces.
Tips & Tricks
  • Glue and assemble the TOP and CRANE ELBOW pieces as indicated.
  • The TOP pieces fit loosely into the CRANE ELBOW pieces. Center the TOP pieces before drying for best results.
  • These create the TOP SUPPORT pieces.
  • On piece 30 ensure all scores are crisply and evenly folded
  • When assembling leg pieces put glue dots in the end of the slots on the larger folded pieces before sliding on the smaller pieces.
  • Check top bars for square before allowing to dry.
  • These create the LEG pieces.
  • Glue and assemble pieces 25 & 26 as shown.
  • Make sure that doubled up edges are aligned before drying.
  • Glue and assemble remaining pieces as indicated.
  • These create the CRANE FEET pieces.
  • Please see TIPS & TRICKS video for the most effective assembly method.
  • When attaching side pieces to the ladder piece, insert tabs into slots on the front rolled edge face of the side pieces.
  • These create the SIDE LADDER pieces.
Tips & Tricks
  • No glue required.
  • Insert the LEG pieces into the CRANE FEET pieces as shown.
  • Making sure the notched outer side of the LEG piece has the larger side facing up as shown.
  • Hang the SIDE LADDER pieces from the LEG pieces as shown within the square cutouts.
  • These create the LEG SUPPORT pieces.
  • OPTIONAL – If desired for ease of assembly and storage you can glue these assemblies together. Please see TIPS & TRICKS video for the proper method.
Tips & Tricks
  • No glue required.
  • Place the assembled TOP SUPPORT pieces onto the assembled LEG SUPPORT pieces as shown.
  • This creates two assembled CRANE STRUCTURE pieces.
  • Glue and assemble pieces 15 & 16 as shown.
  • Make sure that doubled up edges are aligned before drying.
  • These create the PLATFORM TOP pieces.
  • Assemble support structure as shown.
  • Use a generous bead of glue on edges that contact the assembled PLATFORM TOP pieces.
  • Please see TIPS & TRICKS video for the most effective method of gluing the plugs.
  • Clean any excess glue and allow to dry.
  • These create the PLATFORM pieces.
Tips & Tricks
  • On piece 09 ensure all scores are crisply and evenly folded.
  • When assembling leg pieces put glue dots in the end of the slots on the larger folded pieces before sliding on the smaller pieces.
  • Check legs for square before allowing to dry.
  • Please see TIPS & TRICKS video for the most effective method of gluing the plugs.
Tips & Tricks
  • PLATFORM pieces assemble onto legs & feet as indicated.
  • No glue is required.
  • Finally assemble all pieces together.
  • No glue is required.
  • OPTIONAL – If you have Containers they will fit into the CONTAINER CRANE piece as indicated.
  • Glue pieces 33 & 34 together first and let dry.
  • Make sure that doubled up edges are aligned before drying.
  • When attaching pieces 32 & 32, insert tabs into slots on the front rolled edge face of the side pieces.
  • Make sure side pieces are straight up and down before drying.