Containers

  • On pieces 66 & 67 ensure all scores are crisply and evenly folded.
  • Then glue, clamp, and let dry.
  • On piece 69 ensure all scores are crisply and evenly folded.
  • Then ensure piece 68 is glued into the area indicated as centered as possible on all edges.
  • Clamp previous piece as shown.
  • Glue additional piece 68 into place, with similar tolerances on the edges.
  • Wrap piece 69 fully around, gluing additional piece 68 into place.
  • Clamp as shown and allow to dry.
  • This forms the CONTAINER EXTERIOR piece.
  • Glue pieces 64 and 65 to each other as shown. Their back sides should be glued.
  • Piece 64 should be as centered as possible within piece 65.
  • Clamp and allow to dry.
  • Two of these form the END PIECES for the Container.
  • Run a thin line of glue along the outside edge of piece 64 on both assembled END PIECES.
  • Insert them into the ends of the assembled CONTAINER EXTERIOR piece.
  • Clean any excess glue and allow to dry.
  • Glue and assemble as indicated.
  • Please see TIPS & TRICKS video for the most effective assembly method.
Tips & Tricks
  • OPTIONAL – You can glue doors onto one or both ends of your container as desired.